GammaX with U.S. Power Adapter

July 3rd, 2009, 23:14 Posted By: wraggster

New from Divineo USA



On most TVs and projectors movies and games are too dark or missing detail in dark scenes. GammaX fixes this by adding a Gamma Boost without washing out the picture.

Simply plug the GammaX directly into the HDfury2, HDfury, HDfury Gamer Edition, or any device with RGB output and enjoy a more vibrant picture with perfect shadow details!

Using the original HDfury or HDfury Gamer Edition? The GammaX also includes a cable driver which lets you use monitor cables or long RGB projector cables (any length) without having to plug the HDfury or HDfury Gamer Edition directly into your TV!

The included power supply is not needed when the GammaX is used with the HDfury2, simplifying the cables and connections. (The power supply is needed for HDfury, HDfury Gamer Edition, or other RGB source users).

Many projectors and displays only work with either positive or negative sync RGB signals. The GammaX provides a user selectable positive or negative sync switch for displays that only accept negative sync such as the following projectors: Barco 800-801-808-1208, Dwin 500-700, and so on.

The GammaX is 100% Plug-and-play. No configuration or extra steps required. GammaX works at all resolutions, including 1080p and beyond.

Note: GammaX does not support component signals, only RGB. This includes the HDfury2 set to component (YUV) output mode. If you wish to add Gamma Boost to a component-only capable display, use the Box1020 instead.

- Input: RGBHV HD-15 D-Sub (VGA) Female Connector (direct connection to HDfury1 or HDfury2)
- Output: RGBHV HD-15 D-Sub (VGA) Male Connector (direct connection to TV)
- Cable driver built in allowing you to use an analog output cable of any length. Useful for using the original HDfury or HDfury Gamer Edition with monitor cables or long RGB projector cables. No need to plug the HDfury or HDfury Gamer Edition directly into your TV!
- Power supply included for use with HDfury, HDfury Gamer Edition, or other RGB sources
- Power supply not needed if used with the HDfury2, the HDfury2 supplies the power
- Plug-and-play, no extra steps required
- Adjustable Gamma Boost for restoring lost shadow details
- Slide potentiometer for easy Gamma Boost adjustment
- Compatible with all RGB sources
- Supports all standard HD formats and SD formats: 1080p-1080i-720p-etc. in NTSC-PAL-SECAM
- Supports all PC resolutions including extremely high resolutions such as 1600x1200-100Hz and 1920x1440-60Hz
- 450Mhz large signal (-3dB) bandwidth for virtually lossless video processing
- Full dynamic range for maximum picture detail at all resolutions
- User selectable positive or negative sync output for displays that only accept negative sync (ex: Barco 800-801-808-1208, Dwin, etc.)
- Precise black levels - no black crush or missing details or washed-out whites

There are 0 comments - Join In and Discuss Here